Festo AG & Co. KG
8122816
media separated solenoid valve
VYKB-F10-M22C-16-PE-1HPS
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Design structure | Electrical connection at top Rocker valve with diaphragm seal |
| Sealing principle | soft |
| Materials in contact with media | EPDM PEEK |
| Valve function | 2/2 closed, monostable |
| Nominal size | 1,6 mm |
| Flow direction | non reversible |
| Type of actuation | electrical |
| Type of piloting | direct |
| Type of reset | mechanical spring |
| Manual override | None |
| Assembly position | Any |
| Mounting type | With through-hole for M2 screw |
| Electrical connection 1, connection type | Cable with plug |
| Electrical connection 1, connection technology | Plug pattern HP |
| Size | 10 |
| Fluid connection | Flange |
| Medium | Fluid media Gaseous media |
| Note on the medium | Observe resistance of materials that come into contact with media Maximum particle size: 5 µm |
| Internal volume | 35 µl |
| Medium temperature | 0 - 50 °C |
| Temperature of liquid media | 0 - 50 °C |
| Ambient temperature | 0 - 50 °C |
| Storage temperature | -20 - 70 °C |
| Pressure of medium | -0,075 - 0,1 MPa |
| Pressure of medium psi | -10,9 - 14,5 psi |
| Overload pressure | 0,3 MPa |
| Operating voltage range DC | 24 V |
| Permissible voltage fluctuation | +/- 10 % |
| Characteristic coil data | 24 V DC: low-current phase 1 W, high-current phase 3.7 W |
| Duty cycle | 100 % |
| Max. switching frequency | 2 Hz |
| Switching time on | <= 15 ms |
| Switching time off | <= 15 ms |
| Flow rate Kv | 0,034 m3/h |
| Material housing | PEEK |
| Material membrane | EPDM |
| Material seals | EPDM |
| Materials note | Contains PWIS substances Conforms to RoHS |
| Product weight | 20 g |
| Protection class | IP40 |
| Corrosion resistance classification CRC | 0 - No corrosion stress |
| CE mark (see declaration of conformity) | to EU directive for EMC |
© 2022 Festo AG & Co. KG