Festo AG & Co. KG
8114564
media separated solenoid valve
VYKA-F7-M32-12-D2-PF-5YQ7
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Design structure | Rocker valve with diaphragm seal |
| Sealing principle | soft |
| Materials in contact with media | FFPM PEEK |
| Food-safe | See Supplementary material information |
| Valve function | 3/2 open/closed, monostable |
| Nominal size | 1,2 mm |
| Flow direction | reversible with restrictions |
| Type of actuation | electrical |
| Type of piloting | direct |
| Type of reset | mechanical spring |
| Manual override | None |
| Assembly position | Any |
| Mounting type | With through-hole for M2 screw |
| Electrical connection 1, connection type | Plug socket |
| Electrical connection 1, connection technology | Connection pattern Q7 |
| Electrical connection 1, number of pins/wires | 2 |
| Size | 7 |
| Grid dimension | 7,5 mm |
| Fluid connection | Flange |
| Medium | Fluid media Gaseous media |
| Note on the medium | Observe resistance of materials that come into contact with media Maximum particle size: 5 µm |
| Internal volume | 16 µl fluid space valve 26 µl valve with fluid connections |
| Temperature of liquid media | 15 - 50 °C |
| Temperature of gaseous media | 15 - 50 °C |
| Ambient temperature | 15 - 50 °C |
| Storage temperature | -20 - 70 °C |
| Pressure of medium | 0 - 0,2 MPa |
| Medium pressure | 0 - 2 bar |
| Pressure of medium psi | 0 - 29 psi |
| Pressure of medium, reversible | 0 - 0,1 MPa |
| Pressure of medium, reversible (bar) | 0 - 1 bar |
| Pressure of medium, reversible | 0 - 14,5 psi |
| Burst pressure | 2,3 MPa |
| Bursting pressure | 23 bar |
| Burst pressure | 333,5 psi |
| Operating voltage range DC | 12 - 26 V |
| Note on operating voltage range DC | With electrical E-box VAVE-K1-... |
| Permissible voltage fluctuation | +/- 10 % |
| Electrical power consumption | 3,5 W |
| Information on power consumption | Low-current phase 0.3 W, high-current phase 3.5 W for 60 ms, in combination with VAVE-K1-… |
| Characteristic coil data | 12 - 26 V DC: low-current phase 0.06 W, high-current phase 2.2 W |
| Insulation class | B |
| Duty cycle | 100% with holding current reduction Observe notes on operating the solenoid valves |
| Max. switching frequency | 6 Hz |
| Note on switching frequency | Dependent on the ambient temperature and installation state |
| Response time "on" for liquid media | 5 ms |
| Switching time on gaseous media | 5 ms |
| Response time "off" for liquid media | 6 ms |
| Switching time off gaseous media | 5 ms |
| Standard nominal flow rate | 11 l/min |
| Information on standard nominal flow rate | In case of a pressure drop of 1 -> 0 bar (gaseous media) |
| Flow rate Kv | 0,021 m3/h |
| Flow rate Kv (l/min) | 0,35 l/min |
| Information on flow rate Kv | For water as medium Pressure difference 1 bar |
| Water flow rate at max. operating pressure | 0,03 m³/h 0,5 l/min |
| Material housing | PA-reinforced PEEK PPA amplified |
| Material membrane | FFPM |
| Material seals | FFPM |
| Materials note | Conforms to RoHS |
| PWIS conformity | VDMA24364 zone III |
| Product weight | 10,9 g |
| Protection class | IP40 |
| Note on degree of protection | in assembled condition |
| Instructions for use | For indoor use only |
| Corrosion resistance classification CRC | 0 - No corrosion stress |
© 2022 Festo AG & Co. KG