Festo AG & Co. KG
8114534
fluidic muscle
DMSP-20-100N-RM-CM
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Size | 20 |
| Diameter expansion at max. contraction | 40 mm |
| Stroke | 0 - 2250 mm |
| Max. contraction | 25% of nominal length |
| Max. initial tension | 3% of nominal length |
| Nominal length | 100 mm |
| Repetition accuracy | <= 1% of nominal length, cyclical |
| Permissible tolerance for parallelism | ±0.5% for nominal lengths of up to 400 mm |
| Permissible angular tolerance | <= 1 deg |
| Assembly position | Any |
| Design structure | Contractible membrane |
| Operating pressure MPa | 0 - 0,6 MPa |
| Operating pressure | 0 - 6 bar |
| Mode of operation | single-acting pulling action |
| Authorisation | TÜV |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:-:-] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC | 2 - Moderate corrosion stress |
| Ambient temperature | -5 - 60 °C |
| Maximum freely suspended additional load | 80 kg |
| Theoretical muscular energy at maximum operating pressure | 1500 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi) | 1500 N |
| Pneumatic connection | G1/4 |
| Materials note | Free of copper and PTFE Contains PWIS substances Conforms to RoHS |
| Material flange | Wrought Aluminium alloy neutral anodisation |
| Material sleeve | Wrought Aluminium alloy neutral anodisation |
| Material membrane | AR CR |
| Material nut | Steel Galvanised |
© 2022 Festo AG & Co. KG