Festo AG & Co. KG

8110775
linear drive
DFPC-100-125-D

More detailed information about this product!

Festo Data sheet

CriterionFeature
Size of actuator100
Flange hole patternF07
Stroke125 mm
Piston diameter100 mm
Fitting connection conforms to standardISO 5210
CushioningP: Flexible cushioning rings/plates at both ends
Assembly positionAny
Mode of operationdouble-acting
Design structurePiston
Piston rod
Tie rod
Cylinder barrel
Position detectionFor proximity sensor
Operating pressure MPa0,06 - 0,8 MPa
Operating pressure0,6 - 8 bar
Operating pressure8,7 - 116 psi
Nominal operating pressure0,6 MPa
Nominal operating pressure6 bar
Nominal operating pressure (psi)87 psi
Operating mediumCompressed air in accordance with ISO8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (subsequently required for further operation)
Vibration resistanceTransport application test at severity level 1 in accordance with FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 1 in accordance with FN 942017-5 and EN 60068-2-27
PWIS conformityVDMA24364 zone III
Ambient temperature-20 - 80 °C
Impact energy in end positions0,94 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), retracting4524 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance4712 N
Air consumption returning per 10 mm stroke0,528 l
Air consumption advancing per 10 mm stroke0,55 l
Moving mass with 0 mm stroke617,1 g
Additional weight per 10 mm stroke71,4 g
Basic weight for 0 mm stroke1666,6 g
Product weight2560 g
Additional mass factor per 10 mm of stroke24,8 g
Mounting typeOn flange as per ISO 5210
With spacer bolt
Optional
Pneumatic connectionG1/8
Materials noteConforms to RoHS
Material coverGravity die-cast aluminium
Material piston rodHigh alloy steel, non-corrosive
Material piston rod wiper sealTPE-U(PU)
Material nutHigh alloy steel, non-corrosive
Material static sealsNBR
Material tie rodHigh alloy steel, non-corrosive
Material cylinder barrelSmooth-anodised wrought aluminium alloy

© 2022 Festo AG & Co. KG