Festo AG & Co. KG

8110772
linear drive
DFPC-125-150-D

More detailed information about this product!

Festo Data sheet

CriterionFeature
Size of actuator125
Flange hole patternF10
Stroke150 mm
Piston diameter125 mm
Fitting connection conforms to standardISO 5210
CushioningP: Flexible cushioning rings/plates at both ends
Assembly positionAny
Mode of operationdouble-acting
Design structurePiston
Piston rod
Tie rod
Cylinder barrel
Position detectionFor proximity sensor
Operating pressure MPa0,06 - 0,8 MPa
Operating pressure0,6 - 8 bar
Operating pressure8,7 - 116 psi
Nominal operating pressure0,6 MPa
Nominal operating pressure6 bar
Nominal operating pressure (psi)87 psi
Operating mediumCompressed air in accordance with ISO8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (subsequently required for further operation)
Vibration resistanceTransport application test at severity level 1 in accordance with FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 1 in accordance with FN 942017-5 and EN 60068-2-27
PWIS conformityVDMA24364 zone III
Ambient temperature-20 - 80 °C
Impact energy in end positions1,1 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), retracting7069 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance7363 N
Air consumption returning per 10 mm stroke0,825 l
Air consumption advancing per 10 mm stroke0,859 l
Moving mass with 0 mm stroke1059,6 g
Additional weight per 10 mm stroke107,4 g
Basic weight for 0 mm stroke2968,9 g
Product weight4580 g
Additional mass factor per 10 mm of stroke38,9 g
Mounting typeOn flange as per ISO 5210
With spacer bolt
Optional
Pneumatic connectionG1/8
Materials noteConforms to RoHS
Material coverGravity die-cast aluminium
Material piston rodHigh alloy steel, non-corrosive
Material piston rod wiper sealTPE-U(PU)
Material nutHigh alloy steel, non-corrosive
Material static sealsNBR
Material tie rodHigh alloy steel, non-corrosive
Material cylinder barrelSmooth-anodised wrought aluminium alloy

© 2022 Festo AG & Co. KG