Festo AG & Co. KG
8086610
EtherNet/IP interface
CPX-AP-I-EP-M12
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Dimensions W x L x H | 45 mm x 170 mm x 35 mm |
| Diagnostics via LED | Diagnostics per module Network status EtherNet/IP Power supply electronics/sensors Power supply load System diagnostics Maintenance required |
| Diagnostics via bus | Load switch-off Load overvoltage Load undervoltage Electronics/sensors overvoltage Electronics/sensors undervoltage APDD invalid Communication to AP module interrupted |
| Diagnostics per internal communication | Module error Short circuit/overload at output Short circuit/overload in sensor supply Undervoltage in load supply |
| Configuration support | EDS file |
| Polarity protected | Yes |
| Max. no. of modules | 80 |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 90 mA |
| Intrinsic current consumption at nominal operating voltage load | Typical 5 mA |
| Note regarding operating voltage | SELV/PELV fixed power supplies required Note voltage drop |
| Max. power supply | 2 x 4 A (external fuse required) |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Nominal operating voltage, DC outputs | 24 V |
| Power failure buffering | 10 ms |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Permissible voltage fluctuations, load | ± 25 % |
| Power supply, function | Incoming electronics/sensors and load |
| Power supply, type of connection | Plug |
| Power supply, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Power supply, number of pins/wires | 4 |
| Power transmission, function | Outgoing electronics/sensors and load |
| Power transmission, connection type | Plug socket |
| Power transmission, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Power transmission, number of pins/wires | 4 |
| Authorisation | RCM Mark |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | to EU directive for EMC |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| Corrosion resistance classification CRC | 1 - Low corrosion stress |
| Storage temperature | -40 - 70 °C |
| Relative air humidity | 5 - 95 % non-condensing |
| Protection class | IP65 IP67 |
| Note on degree of protection | Unused connections sealed |
| Ambient temperature | -20 - 50 °C |
| Product weight | 194 g |
| Maximum address volume for outputs | 1324 Byte |
| Maximum address volume for inputs | 1324 Byte |
| Fieldbus interface, electrical isolation | Yes |
| Fieldbus interface, transmission rate | 100 Mbit/s |
| Fieldbus interface | Ethernet |
| Max. line length | 50 m system communication |
| Note on max. cable length | Power supply according to nominal voltage |
| Fieldbus interface, type of connection | 2x socket |
| Fieldbus interface, connection technology | M12x1, D-coded in accordance with EN 61076-2-101 |
| Fieldbus interface, number of pins/wires | 4 |
| Fieldbus interface, protocol | EtherNet/IP |
| Communication interface, function | System communication: XF20 OUT / XF21 OUT |
| Communication interface, connection type | 2x socket |
| Communication interface, connection technology | M8x1, D-coded to EN 61076-2-114 |
| Communication interface, number of pins/wires | 4 |
| Communication interface, protocol | AP-COM |
| Communication interface, screening | Yes |
| Mounting type | On H-rail with accessories with through hole |
| Materials note | Conforms to RoHS |
| Material housing | PA PC Nickel-plated die-cast zinc |
| Material o-ring | FPM |
© 2022 Festo AG & Co. KG