Festo AG & Co. KG
8086606
analogue input module
CPX-AP-I-4AI-U-I-RTD-M12
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Dimensions W x L x H | 30 mm x 170 mm x 35 mm |
| No. of inputs | 4 |
| Diagnostics via LED | Diagnostics per module Status per channel |
| Diagnostics per internal communication | Wire break Module error Short circuit/overload in sensor supply Parameter error parameterisation error Overload at analogue inputs Upper limit value not observed Overflow/underflow Lower limit value not observed |
| Polarity protected | Yes |
| Measured variable | Voltage Current Temperature Resistor |
| Repetition accuracy | ±0.025% at 25 °C |
| Fuse protection of inputs (short circuit) | Internal electronic fuse protection per module |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 38 mA |
| Operating error limit related to the ambient temperature range | ±0.15% for voltage ±0.15% for current ±0.35% for resistor ±0.9% for temperature |
| Basic error limit at 25°C | ±0.1% for voltage ±0.1% for current ±0.2% for resistor ±0.4% for temperature |
| Note regarding operating voltage | SELV/PELV fixed power supplies required Note voltage drop |
| Max. power supply | 2 x 4 A (external fuse required) |
| Max. residual current inputs per module | 1 A |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Power failure buffering | 10 ms |
| Electrical isolation of inputs between channels | No |
| Electrical isolation of inputs between channel - internal communication | Yes |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Power supply, function | Incoming electronics/sensors and load |
| Power supply, type of connection | Plug |
| Power supply, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Power supply, number of pins/wires | 4 |
| Power transmission, function | Outgoing electronics/sensors and load |
| Power transmission, connection type | Plug socket |
| Power transmission, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Power transmission, number of pins/wires | 4 |
| Authorisation | RCM Mark |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | to EU directive for EMC |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| Corrosion resistance classification CRC | 1 - Low corrosion stress |
| Storage temperature | -40 - 70 °C |
| Relative air humidity | 5 - 95 % non-condensing |
| Protection class | IP65 IP67 |
| Note on degree of protection | Unused connections sealed |
| Ambient temperature | -20 - 50 °C |
| Product weight | 166 g |
| Signal range | -10 - 10 V -5 - 5 V 0 - 10 V 0 - 20 mA 0 - 500 ohm 1 - 5 V 4 - 20 mA |
| Data format | 15 bits + prefix Linear scaling |
| Max. line length | 30 m inputs 50 m system communication |
| Communication interface, function | System communication XF10 IN / XF20 OUT |
| Communication interface, connection type | 2x socket |
| Communication interface, connection technology | M8x1, D-coded to EN 61076-2-114 |
| Communication interface, number of pins/wires | 4 |
| Communication interface, protocol | AP-COM |
| Communication interface, screening | Yes |
| Electrical connection, input, function | Analogue input |
| Electrical connection, input, connection type | 4x socket |
| Electrical connection, input, connection technology | M12x1, A-coded in accordance with EN 61076-2-101 |
| Electrical connection, input, note on connection technology | To achieve the technical specifications, the opposite side must be screened and designed with gold contact surfaces. |
| Electrical connection, input, number of pins/wires | 5 |
| Mounting type | On H-rail with accessories with through hole |
| Materials note | Conforms to RoHS |
| Material seals | NBR |
| Material housing | PA PC Nickel-plated die-cast zinc |
| Material o-ring | FPM |
© 2022 Festo AG & Co. KG