Festo AG & Co. KG
8075672
retro-reflective sensor
SOOE-RS-L-PNLK-T
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Design | Block design |
| Conforms to standard | EN 60947-5-2 |
| Authorisation | RCM Mark c UL us - Listed (OL) |
| CE mark (see declaration of conformity) | to EU directive for EMC in accordance with EU RoHS directive |
| Certificate issuing department | UL E232949 |
| Materials note | Contains PWIS substances Conforms to RoHS |
| Measuring principle | Optoelectronic |
| Detection method | Retro-reflective sensor |
| Type of light | Laser Red |
| Max. spot diameter | 30 mm at 12000 mm |
| Working range | 0 - 12000 mm |
| Ambient temperature | -40 - 60 °C |
| Reference material | Reference reflector |
| Switch output | Push-pull |
| Switching element function | Switchable PNP, dark switching NPN, light switching |
| Max. switching frequency | 2000 Hz |
| Max. output current | 100 mA |
| Voltage drop | 0 - 1,5 V |
| Timer function | Via IO-Link® |
| Short circuit strength | Pulsing |
| Protocol | IO-Link |
| IO-Link, protocol | Device V 1.1 |
| IO-Link, communication mode | COM2 (38,4 kBaud) |
| IO-Link, SIO mode support | Yes |
| IO-Link, port type | A |
| IO-Link, process data width OUT | 2 bit |
| IO-Link, process data content OUT | 1 bit (emitter disable) 1 bit (hold) |
| IO-Link, process data width IN | 2 bit |
| IO-Link, process data content IN | 1 bit (stability alarm) 1 bit SSC (switching signal) |
| IO-Link, minimum cycle time | 2,3 ms |
| IO-Link, data memory required | 2 kB |
| Operating voltage range DC | 10 - 30 V |
| Residual ripple | 10 % |
| Idle current | 25 mA |
| Polarity protected | for all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Electrical connection 1, number of pins/wires | 3 |
| Electrical connection 1, type of mounting | Screw lock |
| Material electrical contact | Brass, gold-plated |
| Mounting type | With through-hole for M3 screw |
| Tightening torque | 0,8 Nm |
| Assembly position | Any |
| Product weight | 10 g |
| Material housing | PC PMMA |
| Ready status display | Green LED |
| Operating status display | Yellow LED |
| Operating reserve display | Flashing yellow LED |
| Setting options | IO-Link Potentiometer Teach-In |
| Protection class | IP65 IP67 IP69K |
| Insulation voltage | 500 V |
| Surge strength | 1 kV |
| Corrosion resistance classification CRC | 1 - Low corrosion stress |
| Laser protection class | 1 |
| Degree of contamination | 3 |
© 2022 Festo AG & Co. KG