Festo AG & Co. KG
8033495
solenoid valve
VSVA-B-M52-MZ-A2-1T1L-APX-0.5
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Valve function | 5/2 monostable |
| Type of actuation | electrical |
| Width | 18 mm |
| Standard nominal flow rate | 550 l/min |
| Operating pressure MPa | -0,09 - 1 MPa |
| Operating pressure | -0,9 - 10 bar |
| Design structure | Piston slide |
| Type of reset | mechanical spring |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | to EU directive for EMC |
| Protection class | IP65 NEMA 4 |
| Nominal size | 5 mm |
| Exhaust-air function | throttleable Via throttle plate Via individual sub-base |
| Sealing principle | soft |
| Assembly position | Any |
| Manual override | Covered |
| Type of piloting | Piloted |
| Pilot air supply | external |
| Flow direction | non reversible |
| Measuring principle | Inductive |
| Overlap | Positive overlap |
| Reverse polarity protection sensor | For all electrical connections |
| Signal status display | LED |
| Switching position sensing | Normal position with sensor |
| Switching status display sensor | LED |
| Pilot pressure MPa | 0,3 - 1 MPa |
| Pilot pressure | 3 - 10 bar |
| Flow rate of valve | 750 l/min |
| Flow rate of valve on individual sub-base | 600 l/min |
| Optimised flow rate of valve pneumatically concatenated flow | 700 l/min |
| Flow rate of pneumatically linked valve | 550 l/min |
| Switching time off | 38 ms |
| Switching time on | 12 ms |
| Valve - sensor switching time on | 32 ms |
| Valve - sensor switching time off | 9 ms |
| Duty cycle | 100 % |
| Max. positive test pulse with logic 0 | 1500 µs |
| Max. negative test pulse with logic 1 | 800 µs |
| Nominal operating voltage DC | 24 V |
| Switch output | PNP |
| Characteristic coil data | 24 V DC: 1.6 W |
| Surge strength | 2,5 kV |
| Degree of contamination | 3 |
| Permissible voltage fluctuation | +/- 10 % |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Vibration resistance | Transport application test at severity level 2 in accordance with FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 in accordance with FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance classification CRC | 0 - No corrosion stress |
| Medium temperature | -5 - 50 °C |
| Relative air humidity | 0 - 90 % |
| Sound pressure level | 85 dB(A) |
| Ambient temperature | -5 - 50 °C |
| Max. tightening torque, valve mounting | 0,8 - 1,2 Nm |
| Product weight | 157 g |
| Operating voltage range, DC sensor | 10 - 30 V |
| Short-circuit strength sensor | Pulsing |
| Idle current sensor | <= 10 mA |
| Max. output current sensor | 200 mA |
| Max. switching frequency sensor | 5000 Hz |
| Residual ripple sensor | ± 10 % |
| Voltage drop sensor | <= 2 V |
| Electrical connection | 4-pin Plug according to ISO 15407-2 |
| Sensor connection | Plug Cable 4-pin M12x1 0,5 m |
| Mounting type | On sub-base |
| Auxiliary pilot air port 12/14 | Manifold block, size 18 mm acc. to ISO 15407-2 |
| Pilot exhaust port 82/84 | Optional Ducted Non-ducted |
| Pneumatic connection, port 1 | Manifold block, size 18 mm acc. to ISO 15407-2 |
| Pneumatic connection, port 2 | Manifold block, size 18 mm acc. to ISO 15407-2 |
| Pneumatic connection, port 3 | Manifold block, size 18 mm acc. to ISO 15407-2 |
| Pneumatic connection, port 4 | Manifold block, size 18 mm acc. to ISO 15407-2 |
| Pneumatic connection, port 5 | Manifold block, size 18 mm acc. to ISO 15407-2 |
| Materials note | Conforms to RoHS |
| Material seals | FPM NBR |
| Material housing | Aluminium die cast PA |
| Material screws | Galvanised steel |
| Switching element function | Normally closed contact |
© 2022 Festo AG & Co. KG