Festo AG & Co. KG
8005024
semi-rotary drive
DAPS-1920-090-R-F14-MW-T6
double-acting, air connection to VDI/VDE 3845 Namur valves, direct flange mounting, version with handwheel and low temperature.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Size of actuator | 1920 |
| Flange hole pattern | F14 |
| Swivel angle | 92 deg |
| Shaft connection depth | 48,5 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | No cushioning |
| Assembly position | Any |
| Mode of operation | double-acting |
| Design structure | Yoke kinematics |
| Position detection | No |
| Closing direction | right-closing |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | Product can be used in SRP/CS up to SIL 2 (high demand) Product can be used in SRP/CS up to SIL 2 low demand |
| Operating pressure MPa | 0,3 - 0,84 MPa |
| Operating pressure | 3 - 8,4 bar |
| Nominal operating pressure | 0,56 MPa |
| Nominal operating pressure | 5,6 bar |
| CE mark (see declaration of conformity) | to EU directive explosion protection (ATEX) |
| UKCA marking (see declaration of conformity) | To UK EX instructions |
| ATEX category Gas | II 2G |
| ATEX category Dust | II 2D |
| Explosion ignition protection type Gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type Dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion-proof ambient temperature | -50°C <= Ta <= +60°C |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC | 2 - Moderate corrosion stress |
| Ambient temperature | -50 - 60 °C |
| Torque at rated operating pressure and 0° rotation angle | 1920 Nm |
| Torque at nominal operating pressure with 50° swivel angle | 960 Nm |
| Torque at nominal operating pressure with 90° swivel angle | 1440 Nm |
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° | 90,3 l |
| Product weight | 43000 g |
| Shaft connection | T46 |
| Pneumatic connection | G1/4 |
| Materials note | Contains PWIS substances Conforms to RoHS |
| Material cover | Wrought Aluminium alloy |
| Material seals | FVMQ PTFE reinforced |
| Material housing | Wrought Aluminium alloy |
| Material screws | High alloy steel |
| Material shaft | High alloy steel |
| Material number for shaft | 1.4305 |
© 2022 Festo AG & Co. KG