Festo AG & Co. KG
3929312
positioner
CMSX-P-S-C-U-F1-D-130-A
electropneumatic, for double-acting pneumatic quarter turn actuators, standard nominal flow rate 130 l/min, opening/closing regulating action safety function, 4-wire, power supply 24 VDC, setpoint input 0/4-20 mA, 0-10 V, position feedback signal 4...20 mA.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Design structure | Digital electropneumatic positioner |
| Mode of operation | double-acting |
| Design features | Safety position - pneumatic outlet 4 exhausted Safety position – pneumatic outlet 2 pressurised |
| Assembly position | Any |
| Mounting type | with accessories |
| Measuring method: displacement encoder | Potentiometer |
| Display | 7-segment LCD-Display With background illumination |
| Setting options | Via display and buttons |
| Size of the dead zone | 0,5 - 10 % |
| Operating pressure | 3 - 8 bar |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Standard nominal flow rate | 130 l/min |
| Pneumatic connection | G1/8 |
| Nominal operating voltage DC | 24 V |
| Operating voltage range DC | 21,6 - 26,4 V |
| Max. current consumption | 600 mA |
| Polarity protected | For operating voltage connections |
| Analogue inputs, signal range | 0 - 10 V 0 - 20 mA 4 - 20 mA |
| Analogue inputs, linearity error at 25°C | 0,5% |
| Analogue inputs, temperature coefficient | < 0,02 %FS/K |
| Analogue inputs, resolution | 16 bit |
| Analogue inputs, overload protection | Yes |
| Analogue inputs, galvanic isolation | No |
| Analogue outputs, signal range | 4 - 20 mA |
| Analogue outputs, max. load resistance | <= 600 ohm |
| Analogue outputs, linearity error at 25° C | 0,5% |
| Analogue outputs, temperature coefficient | < 0,02 %FS/K |
| Analogue outputs, resolution | 12 bit |
| Analogue outputs, reverse polarity protection | Yes |
| Analogue outputs, short circuit current rating | Yes |
| Analogue outputs, overload protection | Yes |
| Analogue outputs, galvanic isolation | No |
| Input characteristics | to IEC 61131-2, type 3 |
| Switching input | PNP NPN |
| Digital inputs, reverse polarity protection | Yes |
| Digital inputs, electrical isolation | Yes, via optocoupler |
| Digital outputs, reverse polarity protection | Yes |
| Switch output | 3 x PNP or 3 x NPN, switchable |
| Digital outputs, output current | 100 mA |
| Digital outputs, short-circuit proof | Yes |
| Digital outputs, overload proof | Yes |
| Digital outputs, electrical isolation | Yes, via optocoupler |
| Electrical connection 1, function | 2x digital inputs 3x digital output Analogue output Analogue input Power supply Power supply load |
| Electrical connection 1, connection type | Terminal strip |
| Electrical connection 1, connection technology | Screwed terminal |
| Electrical connection 1, number of pins/wires | 14 |
| Electrical connection 1, tightening torque | 0,6 Nm |
| Electrical connection 1, conductor cross section | < 1,5 mm2 |
| Cable gland connection | M20x1.5 electrical connection 1 |
| Permissible cable diameter | 7 - 13 mm electrical connection 1 |
| Max. line length | 30 m for electrical connection 1 |
| Ambient temperature | -5 - 60 °C |
| Storage temperature | -20 - 60 °C |
| Relative air humidity | 93 % |
| Protection class | IP65 |
| Shock resistance | Shock test with severity level 1 in accordance with FN 942017-5 and EN 60068-2-27 as per EN 60068-2-29 |
| Vibration resistance | Transport application test at severity level 2 in accordance with FN 942017-4 and EN 60068-2-6 as per EN 60068-2-6 |
| Degree of contamination | 3 |
| Authorisation | RCM Mark |
| CE mark (see declaration of conformity) | to EU directive for EMC in accordance with EU RoHS directive |
| Material housing | Reinforced PC |
| Material screen | PC |
| Material sub-base | Wrought Aluminium alloy Anodised |
| Material shaft | High alloy steel, non-corrosive |
| Material coupling | High alloy steel, non-corrosive |
| Material screws | High alloy steel, non-corrosive |
| Material seals | NBR |
| Information on materials, cable connector | PA |
| Material blanking plug | PA |
| Materials note | Conforms to RoHS |
| Product weight | 970 g |
| Dimensions W x L x H | 190 mm x 105 mm x 130 mm |
© 2022 Festo AG & Co. KG