Festo AG & Co. KG
2427618
proximity sensor
SDBT-BSW-1L-NU-W-5-N-LE
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Design | for T-slot |
| Based on the standard | EN 60947-5-2 |
| Authorisation | RCM Mark c UL us - Listed (OL) |
| CE mark (see declaration of conformity) | to EU directive for EMC in accordance with EU RoHS directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions |
| KC mark | KC-EMV |
| Special characteristics | UV resistant Oil resistant Welding field immune Resistant to welding spatter |
| Materials note | Free of copper and PTFE Conforms to RoHS |
| Instructions for use | Support / Actuator-sensor overview "The right sensor for the actuator" |
| Measured variable | Position |
| Measuring principle | Magnetoresistive |
| Ambient temperature | -25 - 85 °C |
| Max. travel speed | 1 m/s |
| Repetition accuracy | 0,2 mm |
| Switch output | NPN |
| Switching characteristics during the welding process | Output signal freezes |
| Switching element function | Normally open contact |
| Switch-on time | <= 15 ms |
| Switch-off time | <= 25 ms |
| Max. switching frequency | 25 Hz |
| Max. output current | 100 mA |
| Max. output current in mounting kits | 100 mA |
| Max. contact rating DC | 2,8 W |
| Max. switching capacity DC in mounting kits | 2,8 W |
| Voltage drop | < 1,5 V |
| Inductive protective circuit | Adapted to MZ-, MY-, ME coils |
| Minimum load current | 0 mA |
| Residual current | < 0,14 mA |
| Short circuit strength | Yes |
| Overload withstand capability | Available |
| Nominal operating voltage DC | 24 V |
| Operating voltage range DC | 10 - 30 V |
| Residual ripple | 10 % |
| Polarity protected | for all electrical connections |
| Electrical connection 1, connection type | Cable |
| Electrical connection 1, connection technology | Open end |
| Electrical connection 1, number of pins/wires | 3 |
| Connector exit direction | axial |
| Test conditions of cable | Bending strength according to Festo standard Test conditions on request |
| Cable length | 5 m |
| Cable attribute | Resistant to welding spatter |
| Cable sheath colour | Grey |
| Material cable sheath | PVC, irradiated |
| Material insulation | PVC |
| Wire ends | Wire end ferrule |
| Mounting type | Tightened Insertable in slot from above |
| Max. tightening torque | 0,6 Nm |
| Assembly position | Any |
| Product weight | 119,4 g |
| Housing colour | Black |
| Material housing | Epoxy resin PA-reinforced High alloy steel, non-corrosive |
| Operating status display | Yellow LED |
| Operating reserve display | LED orange |
| Ambient temperature with flexible cable installation | -5 - 80 °C |
| Protection class | IP65 IP68 |
| Interference immunity to magnetic fields | Insensitive to alternating magnetic fields (50 ... 60 Hz) < 200 mT Insensitive to MFDC magnetic fields (1000 Hz) < 200 mT Design insensitive to permanent magnetic fields < Bon |
| PWIS conformity | VDMA24364-B2-L |
© 2022 Festo AG & Co. KG