Festo AG & Co. KG
1622901
motor controller
CMMP-AS-C2-3A-M0
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Mounting type | On sub-base Tightened |
| Product weight | 2100 g |
| Display | Seven-segment display |
| Authorisation | RCM Mark c UL us - Listed (OL) |
| CE mark (see declaration of conformity) | to EU directive for EMC to EU directive for machinery to EU directive low-voltage devices in accordance with EU RoHS directive |
| Certificate issuing department | 01/205/5162.02/19 TÜV Rheinland |
| Storage temperature | -25 - 70 °C |
| Ambient temperature | 0 - 40 °C |
| Relative air humidity | 0 - 90 % |
| Protection class | IP10 IP20 |
| Degree of contamination | 2 |
| Materials note | Conforms to RoHS |
| PWIS conformity | VDMA24364 zone III |
| Nominal operating voltage, phases | Single-phase |
| Nominal operating voltage, AC | 230 V |
| Permissible voltage fluctuation | +/- 10 % |
| Line frequency | 50 - 60 Hz |
| Nominal current | 2 - 3 A |
| Active PFC | Yes |
| Mains filter | Integrated |
| Max. intermediate circuit voltage, DC | 320 V |
| Braking resistance | 60 Ohm |
| Braking resistance pulse power | 2,8 kVA |
| Nominal DC voltage, logic power supply | 24 V |
| Permissible range, logic voltage | ± 20 % |
| Current consumption, logic power supply without clamping brake | 0,55 A |
| Output voltage range AC | 3x 0 - 270 V |
| Nominal output current | 2,5 A |
| Effective nominal current per phase | 2,5 A |
| Effective peak current per phase | 5 A |
| Max. peak current duration | 5 s |
| Nominal controller power | 500 VA |
| Peak power | 1000 VA |
| Output frequency | 0 - 1000 Hz |
| Parameters configuring interface | Parameters configuration and commissioning USB Ethernet |
| Fieldbus coupling | CANopen Modbus/TCP |
| Communications profile | DS301/DSP402 |
| Process interface | I/O coupling For 256 position sets |
| Max. fieldbus transmission speed | 1 Mbit/s |
| Bus connection | 9-pin Sub-D Plug socket |
| Encoder interface output, characteristics | Resolution 16384 ppr |
| Encoder interface output, function | Actual value feedback via encoder signals in speed control mode Setpoint specification for downstream slave drive unit |
| Encoder interface input, characteristics | 3-phase encoding signals EnDat HIPERFACE RS422 SINCOS |
| Encoder interface input, function | Encoder signal, speed setpoint in RPM In synchronous operation as specified speed in RPM for the slave drive unit |
| Number of digital logic inputs | 10 |
| Logic input characteristics | Electrically isolated Freely configurable |
| Logic input working range | 8 - 30 V |
| Number of 24 V DC digital logic outputs | 5 |
| Digital logic output characteristics | Electrically isolated Freely configurable to a given extent |
| Max. current, digital logic outputs | 100 mA |
| Number of analogue setpoint inputs | 2 |
| Setpoint input characteristics | Differential inputs Can be configured for speed in RPM Can be configured for current |
| Setpoint input working range | ± 10 V |
| Setpoint input impedance | 20 kOhm |
| Number of analogue monitor outputs | 2 |
| Monitor output working range | ± 10 V |
| Monitor output resolution | 9 bit |
| Monitor output characteristics | Short-circuit proof |
| Safety function | Safe torque off (STO) Safe stop 1 (SS1) |
| Safety Integrity Level (SIL) | Safe torque off (STO)/SIL 3/SILCL 3 |
| Performance level (PL) | Safe Torque off (STO)/Category 4, Performance Level e |
| Diagnostic coverage | 97 % |
| SFF Safe Failure Fraction | 99,17 % |
| Hardware fault tolerance | 1 |
| Proof test interval | 20 a |
© 2022 Festo AG & Co. KG