Festo AG & Co. KG
1501331
safety module
CAMC-G-S3
One plug-in module CAMC-DS-M1, CAMC-G-S1 or CAMC-G-S3 is required in order to operate the motor controller CMMP-AS-…-M3.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Nominal DC voltage, logic power supply | 24 V |
| Nominal operating voltage DC | 24 V |
| Nominal current, logic supply | 0,15 A |
| Permissible range, logic voltage | ± 20 % |
| Current consumption, logic power supply without clamping brake | 0,2 A |
| Short circuit strength | Yes, exception: contact C1/C2 |
| Acceptable current load at 40°C | 0,2 A |
| Protection (short circuit) | No |
| Design of the digital output | Potential-free signal contact 3 safe, 2-channel semiconductor outputs |
| Number of digital logic inputs | 10 |
| Digital outputs, switching logic | Semiconductor outputs: parameterisable PNP (positive switching) 2-channel equivalent/antivalent |
| Dimensions W x L x H | 112,2 mm x 99,1 mm x 28,7 mm |
| Product-specific LED display | Error (red) Normal operation (green) Safe state (yellow) |
| Safety function | Safe brake control (SBC) Safe speed range (SSR) Safe speed monitor (SSM) Safe torque off (STO) Safely-limited speed (SLS) Safe operating stop (SOS) Safe stop 1 (SS1) Safe stop 2 (SS2) |
| Probability of Failure per Hour in [1/h]. | 9,50000000E-09 |
| Proof test interval | 20 a |
| Hardware fault tolerance | 1 |
| SFF Safe Failure Fraction | 99,5 % |
| Certified for safety function to ISO 13849 and IEC 61508 (SIL) | Product can be used in SRP/CS up to SIL 3 (high demand) |
| Safety Integrity Level (SIL) | Safe brake control (SBC)/SIL 3 Safely limited speed (SLS)/SIL 3 Safe operating stop (SOS)/SIL 3 Safe stop 1 (SS1)/SIL 3 Safe stop 2 (SS2)/SIL 3 Safe Speed Monitor (SSM)/SIL 3 Safe Speed Range (SSR)/SIL 3 Safe torque off (STO)/SIL 3 |
| Performance level (PL) | Safe brake control (SBC)/category 4, Performance Level e Safely limited speed (SLS)/category 3, Performance Level e Safe operating stop (SOS)/category 3, Performance Level e Safe stop 1 (SS1)/category 3, Performance Level e Safe stop 2 (SS2)/category 3, Performance Level e Safe speed monitor (SSM)/category 3, Performance Level e Safe speed range (SSR)/category 3, Performance Level e Safe Torque off (STO)/Category 4, Performance Level e |
| Diagnostic coverage | 97,5 % |
| Certified for safety functions to ISO 13849 (PL) | Product can be used in SRP/CS up to category 4, PL e |
| Authorisation | TÜV |
| CE mark (see declaration of conformity) | to EU directive for EMC to EU directive for machinery |
| Certificate issuing department | 01/205/5165.02/19 TÜV Rheinland |
| PWIS conformity | VDMA24364 zone III |
| Storage temperature | -25 - 55 °C |
| Relative air humidity | 5 - 90 % non-condensing |
| Protection class | IP20 in assembled condition |
| Ambient temperature | 0 - 40 °C |
| Product weight | 220 g |
| Mounting type | Plug-in module for CMMP-AS...-M3 |
| Materials note | Conforms to RoHS |
| Assembly position | Any |
| Wire ends | Wire end ferrule |
| Terminal cross-section | 0,25 - 0,5 mm2 |
| Electrical connection | Screwed terminal Plug straight |
| Display | LED green/yellow/red |
| Control elements | DIP switches |
| Specification, logic input | IEC 61131-2, type 3 |
| Logic input characteristics | 4 safe, 2-channel inputs Equivalent/antivalent switching Test pulses configurable Function configurable 6 safe, 1-channel inputs Test pulses configurable |
| Logic input working range | 13 - 28,8 V |
| Max. nominal input current | 0,015 A |
| Debouncing time, inputs | 0,3 ms |
| Current-carrying capacity per output | 50 mA |
| Max. current, digital logic outputs | 50 mA |
| Fuse protection, output | Short-circuit and cross-circuit monitoring |
| Minimum cycle time | 2 ms |
| Parameters configuring | Via SafetyTool |
© 2022 Festo AG & Co. KG