Festo AG & Co. KG
1501330
safety module
CAMC-G-S1
One plug-in module CAMC-DS-M1, CAMC-G-S1 or CAMC-G-S3 is required in order to operate the motor controller CMMP-AS-…-M3.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Nominal DC voltage, logic power supply | 24 V |
| Nominal operating voltage DC | 24 V |
| Nominal current, logic supply | 0,02 A |
| Permissible range, logic voltage | ± 20 % |
| Current consumption, logic power supply without clamping brake | 0,03 A |
| Short circuit strength | No |
| Acceptable current load at 40°C | 0,2 A |
| Protection (short circuit) | No |
| Design of the digital output | Potential-free signal contact |
| Number of digital logic inputs | 2 |
| Digital outputs, switching logic | Contact closes with safe torque off (STO) |
| Dimensions W x L x H | 112,6 mm x 87,2 mm x 28,3 mm |
| Product-specific LED display | Normal operation (green)/STO (yellow) |
| Safety function | Safe torque off (STO) |
| Probability of Failure per Hour in [1/h]. | 1,27000000E-10 |
| PFD (Probability of Failure on Demand) | 2,30000000E-05 |
| Proof test interval | 20 a |
| Hardware fault tolerance | 1 |
| SFF Safe Failure Fraction | 99,2 % |
| Certified for safety function to ISO 13849 and IEC 61508 (SIL) | Product can be used in SRP/CS up to SIL 3 (high demand) |
| Safety Integrity Level (SIL) | Safe torque off (STO)/SIL 3/SILCL 3 |
| Performance level (PL) | Safe Torque off (STO)/Category 4, Performance Level e |
| Diagnostic coverage | 97 % |
| Certified for safety functions to ISO 13849 (PL) | Product can be used in SRP/CS up to category 4, PL e |
| Authorisation | TÜV |
| CE mark (see declaration of conformity) | to EU directive for EMC to EU directive for machinery in accordance with EU RoHS directive |
| Certificate issuing department | 01/205/5165.02/19 TÜV Rheinland |
| PWIS conformity | VDMA24364 zone III |
| Storage temperature | -25 - 55 °C |
| Relative air humidity | 5 - 95 % non-condensing |
| Protection class | IP20 in assembled condition |
| Ambient temperature | 0 - 40 °C |
| Product weight | 75 g |
| Mounting type | Plug-in module for CMMP-AS...-M3 |
| Materials note | Conforms to RoHS |
| Assembly position | Any |
| Wire ends | Wire end ferrule |
| Terminal cross-section | 0,25 - 0,5 mm2 |
| Electrical connection | Screwed terminal Plug straight |
| Display | LED green/yellow |
| Control elements | None |
| Specification, logic input | Based on IEC 61131-2 |
| Logic input characteristics | Electrically isolated |
| Logic input working range | 19,2 - 28,8 V |
| Max. nominal input current | 0,03 A |
| Debouncing time, inputs | 0,3 ms |
| Current-carrying capacity per output | 200 mA |
| Max. current, digital logic outputs | 200 mA |
| Fuse protection, output | No |
© 2022 Festo AG & Co. KG