Festo AG & Co. KG
1254042
parallel gripper
DHPS-10-A-NC
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Size | 10 |
| Stroke per gripper jaw | 3 mm |
| Max. replacement accuracy | <= 0,2 mm |
| Max. angular gripper jaw backlash ax,ay | < 0,5 deg |
| Max. gripper jaw backlash Sz | < 0,02 mm |
| Rotationally symmetrical | <= 0,2 mm |
| Repetition accuracy, gripper | < 0,02 mm |
| Number of gripper fingers | 2 |
| Assembly position | Any |
| Mode of operation | double-acting |
| Gripper function | Parallel |
| Gripper force back-up | On closing |
| Design structure | Lever guided motion sequence |
| Guide | Plain-bearing guide |
| Position detection | For proximity sensor |
| Operating pressure | 4 - 8 bar |
| Max. operating frequency of gripper | 4 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 58 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 24 ms |
| Max. mass per external gripper finger | 60 g |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC | 1 - Low corrosion stress |
| Ambient temperature | 5 - 60 °C |
| Mass moment of inertia | 0,081 kgcm2 |
| Max. force on gripper jaw Fz static | 60 N |
| Max. torque at gripper Mx static | 3 Nm |
| Max. torque at gripper My static | 3 Nm |
| Max. torque at gripper Mz static | 3 Nm |
| Lubrication interval for guide components | 10 Mio SP |
| Product weight | 68 g |
| Mounting type | Internal thread and centring sleeve With through-hole and centring sleeve Optional |
| Pneumatic connection | M3 |
| Materials note | Conforms to RoHS |
| Material cover cap | PA |
| Material housing | Wrought Aluminium alloy Hard anodised |
| Material gripper jaws | High alloy steel, non-corrosive |
© 2022 Festo AG & Co. KG