Festo AG & Co. KG
579071
proximity sensor
SDBT-MS-20NL-ZN-E-5-LE-EX6
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Design | for T-slot |
| Based on the standard | EN 60947-5-6 |
| Authorisation | RCM Mark |
| CE mark (see declaration of conformity) | to EU directive for EMC to EU directive explosion protection (ATEX) in accordance with EU RoHS directive |
| KC mark | KC-EMV |
| ATEX category Gas | II 1G |
| Explosion ignition protection type Gas | Ex ia IIC T4...T6 Ga |
| ATEX category Dust | II 1D |
| Explosion ignition protection type Dust | Ex ia IIIC T135°C Da |
| Explosion protection certification outside the EU | EPL Da (BR) EPL Da (CN) EPL Da (IEC-EX) EPL Da (KR) EPL Ga (BR) EPL Ga (CN) EPL Ga (IEC-EX) EPL Ga (KR) |
| Explosion-proof ambient temperature | T4, with fixed cable installation: -40°C <= Ta <= +85°C T4: -20°C <= Ta <= +85°C T6, with fixed cable installation: -40°C <= Ta <= +45°C T6: -20°C <= Ta <= +45°C |
| Max. input voltage | 28 V |
| Max. input current | 0,25 A |
| Max. input power | T4: 350 mW T6: 72 mW |
| effective inductivity | 30 µH |
| effective capacity | 79 nF |
| Certificate issuing department | 21-AV4BO-0130X 21-AV4BO-0131X DNV 17.0027 X GYJ20.1106X IECEx PTZ 18.0008X PTZ 16 ATEX 0010 X |
| Special characteristics | Oil resistant |
| Materials note | Free of copper and PTFE Conforms to RoHS Halogen-free |
| Instructions for use | Support / Actuator-sensor overview "The right sensor for the actuator" |
| Measured variable | Position |
| Measuring principle | Magnetoresistive |
| Ambient temperature | -40 - 85 °C |
| Repetition accuracy | 0,2 mm |
| Switch output | NAMUR |
| Switching element function | NAMUR |
| Switch-on time | < 1 ms |
| Switch-off time | < 1 ms |
| Max. switching frequency | 330 Hz |
| Residual current | 0,4 - 1 mA |
| Nominal operating voltage DC | 8,2 V |
| Operating voltage range DC | 7,5 - 18 V |
| Residual ripple | 10 % |
| Polarity protected | for all electrical connections |
| Electrical connection 1, connection type | Cable |
| Electrical connection 1, connection technology | Open end |
| Electrical connection 1, number of pins/wires | 2 |
| Connector exit direction | axial |
| Test conditions of cable | Bending strength according to Festo standard Test conditions on request |
| Cable length | 5 m |
| Cable attribute | For robots Suitable for chain link trunking |
| Cable sheath colour | blue |
| Material cable sheath | TPE-U(PUR) |
| Material insulation | PP |
| Wire ends | Wire end ferrule |
| Mounting type | Tightened Insertable in slot from above |
| Tightening torque | 0,1 - 0,6 Nm |
| Max. tightening torque | 0,6 Nm |
| Assembly position | Any |
| Product weight | 53 g |
| Housing colour | Black |
| Material housing | PA-reinforced High alloy steel, non-corrosive |
| Operating status display | Yellow LED |
| Ambient temperature with flexible cable installation | -20 - 85 °C |
| Protection class | IP65 IP68 |
| PWIS conformity | VDMA24364-B2-L |
© 2022 Festo AG & Co. KG