Festo AG & Co. KG
574383
proximity sensor
CRSMT-8M-PS-24V-K-0,3-M8D
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Design | for T-slot |
| Based on the standard | EN 60947-5-2 |
| Authorisation | RCM Mark |
| CE mark (see declaration of conformity) | to EU directive for EMC to EU directive explosion protection (ATEX) |
| KC mark | KC-EMV |
| ATEX category Gas | II 3G |
| Explosion ignition protection type Gas | Ex nA IIC T4 X Gc |
| ATEX category Dust | II 3D |
| Explosion ignition protection type Dust | Ex tc IIIC T120°C X Dc |
| Explosion-proof ambient temperature | -40°C <= Ta <= +85°C |
| Special characteristics | Resistant to cooling lubricants Alkali resistant Acid resistant |
| Materials note | Conforms to RoHS Halogen-free |
| Instructions for use | Support / Actuator-sensor overview "The right sensor for the actuator" |
| Measured variable | Position |
| Measuring principle | Magnetoresistive |
| Ambient temperature | -40 - 85 °C |
| Repetition accuracy | 0,2 mm |
| Switch output | PNP |
| Switching element function | Normally open contact |
| Switch-on time | <= 1 ms |
| Switch-off time | <= 1 ms |
| Max. switching frequency | 180 Hz |
| Max. output current | 100 mA |
| Max. output current in mounting kits | 100 mA |
| Max. contact rating DC | 2,8 W |
| Max. switching capacity DC in mounting kits | 2,8 W |
| Voltage drop | < 1,5 V |
| Inductive protective circuit | Adapted to MZ-, MY-, ME coils |
| Minimum load current | 0 mA |
| Residual current | < 0,05 mA |
| Short circuit strength | Yes |
| Overload withstand capability | Available |
| Nominal operating voltage DC | 24 V |
| Operating voltage range DC | 5 - 30 V |
| Residual ripple | 10 % |
| Polarity protected | for all electrical connections |
| Electrical connection 1, connection type | Cable with plug |
| Electrical connection 1, connection technology | M8x1, A-coded to EN 61076-2-104 |
| Electrical connection 1, number of pins/wires | 3 |
| Electrical connection 1, type of mounting | Screw lock |
| Connector exit direction | axial |
| Material electrical contact | Nickel-plated and gold-plated brass |
| Material connector housing | PP |
| Test conditions of cable | Bending strength according to Festo standard Chain link trunking: 5 million cycles, bending radius 75 mm Torsion resistance: > 300,000 cycles, ±270°/0.1 m |
| Cable length | 0,3 m |
| Cable attribute | Standard + chain link trunking |
| Cable sheath colour | Grey |
| Material cable sheath | TPE-O |
| Material insulation | PP |
| Mounting type | Tightened Insertable in slot from above |
| Tightening torque | 0,1 - 0,6 Nm |
| Max. tightening torque | 0,6 Nm |
| Assembly position | Any |
| Product weight | 16,1 g |
| Housing colour | Black |
| Material housing | PA PP High alloy steel, non-corrosive |
| Material of union nut | Nickel-plated brass |
| Operating status display | Yellow LED |
| Operating reserve display | LED orange |
| Ambient temperature with flexible cable installation | -20 - 85 °C |
| Protection class | IP65 IP68 IP69K |
| Interference immunity to magnetic fields | Design insensitive to permanent magnetic fields < Bon |
| PWIS conformity | VDMA24364-B2-L |
| Food-safe | See Supplementary material information |
© 2022 Festo AG & Co. KG