Festo AG & Co. KG
567798
solenoid valve
MHJ10-S-2,5-QS-6-HF/LP
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Valve function | 2/2 closed, monostable |
| Type of actuation | electrical |
| Width | 10 mm |
| Standard nominal flow rate | 160 l/min |
| Operating pressure MPa | 0,05 - 0,4 MPa |
| Operating pressure | 0,5 - 4 bar |
| Design structure | Poppet valve without spring return |
| Type of reset | Air spring |
| Protection class | IP55 |
| Authorisation | RCM Mark |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | to EU directive for EMC |
| Grid dimension | 10,5 mm |
| Note on operation | Power supply unit must be able to supply at least 1.7 A without voltage drop Do not operate without flow For block mounting with flow, max. ambient temperature 45°C. |
| Sealing principle | Hard |
| Assembly position | Any |
| Manual override | None |
| Type of piloting | direct |
| Flow direction | non reversible |
| Polarity protected | for operating voltage |
| Additional functions | Spark arresting Reduction of holding current with energy recovery Safety shut-off |
| b value | 0,36 |
| C value | 0,66 l/sbar |
| Maximum switching frequency | 500 Hz |
| Switching time on at 0.4 MPa (4 bar, 58 psi) and 24 V in new condition | 1 ms |
| Switching time off at 0.4 MPa (4 bar, 58 psi) and 24 V in new condition | 0,5 ms |
| Switching time on at 0.05 MPa (0.5 bar, 7.25 psi) and 24 V in new condition | 0,8 ms |
| Switching time off at 0.05 MPa (0.5 bar, 7.25 psi) and 24 V in new condition | 0,6 ms |
| Tolerance for Switching time OFF | +15 %/-25 % |
| Tolerance for Switching time ON | +/-15 % |
| Operating voltage range DC | 21,6 - 26,4 V |
| Input resistance | 34 kOhm |
| Duty cycle | 100 % |
| Characteristic coil data | 24 V DC: low-current phase 2 W, high-current phase 7 W |
| Trigger signal range DC | 3 - 30 V |
| Note on feeder current | Linear rise 0.09 - 0.44 mA with a trigger signal of 3 - 15 V 0.44-15.44 mA with a trigger signal of 15-30 V |
| Permissible voltage fluctuation | +/- 10 % |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Restriction ambient and medium temperature | related to switching frequency |
| Corrosion resistance classification CRC | 2 - Moderate corrosion stress |
| Storage temperature | -20 - 50 °C |
| Max. permissible solenoid surface temperature | 120 °C |
| Medium temperature | -5 - 60 °C |
| Ambient temperature | -5 - 60 °C |
| Product weight | 85 g |
| Electrical connection | 3-core Cable |
| Cable length | 2,5 m |
| Mounting type | Line installation with through hole Optional |
| Pneumatic connection, port 1 | QS-6 |
| Pneumatic connection, port 2 | QS-6 |
| Materials note | Conforms to RoHS |
| Material seals | HNBR |
| Material housing | PA-reinforced PPS-reinforced |
| Material cable sheath | PUR |
| Material screws | Steel |
© 2022 Festo AG & Co. KG