Festo AG & Co. KG
562563
handling module
HSW-12-AP-SD-AW
Pick and Place for repositioning parts at an angle of 90°, with protective cover and additional rest position.
More detailed information about this product!
Festo Data sheet
Criterion | Feature |
Working stroke | 15 - 25 mm |
Size | 12 |
Max. linear stroke at 90° swivel angle | 142/142 mm |
Maximum Z-stroke, wait position | 15 mm |
Z stroke | 80 - 100 mm |
Cushioning | CC: Shock absorber at both ends Soft characteristic |
Assembly position | Any |
Design structure | linear guide plus rotating bearing Swivel drive guided motion sequence |
Position detection | For proximity sensor |
Operating pressure | 4 - 8 bar |
Minimum cycle time | 0,8 s |
Repetition accuracy, end positions | +/-0,02 mm |
Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:-:-] |
Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
Ambient temperature | 0 - 60 °C |
Max. torque Mx | 1,5 Nm |
Max. torque My | 1,5 Nm |
Max. torque Mz | 1,5 Nm |
Maximum effective load | 1 kg |
Maximum process force in Y direction | 35 N |
Theoretical force at 0.6 MPa (6 bar, 87 psi) | 35 N |
Product weight | 3260 g |
Mounting type | With through-hole and centring sleeve |
Pneumatic connection, wait position | M5 |
Pneumatic connection | M5 |
Material stops | High alloy steel |
Material cover | Wrought Aluminium alloy Anodised |
Material spring pressure piece | High alloy steel |
Material sub-base | Wrought Aluminium alloy Anodised |
Material bracket | Wrought Aluminium alloy Anodised |
Material cross-guide | Heat-treatment steel |
Material swivel lever | Case-hardened steel Burnished |
Material slotted guide plate | Case-hardened steel Hardened |
Material sensor rail | Wrought Aluminium alloy Anodised |
Material bar | Wrought Aluminium alloy Anodised |
Material adjusting screw | High alloy steel |
© 2022 Festo AG & Co. KG