Festo AG & Co. KG
557772
proportional pressure regulator
VPPE-3-1-1/8-6-010-E1
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Nominal diameter, pressurisation | 5 mm |
| Nominal diameter, exhaust | 2,5 mm |
| Type of actuation | electrical |
| Sealing principle | soft |
| Assembly position | Any Preferably upright |
| Design structure | Pilot actuated diaphragm regulator |
| Short circuit strength | for all electrical connections |
| Safety instructions | VPPE safety position: If the power supply cable is interrupted, output pressure is maintained unregulated. |
| Polarity protected | for all electrical connections |
| Type of reset | mechanical spring |
| Type of piloting | Piloted |
| Valve function | 3-way proportional-pressure regulator |
| Type of display | LED display 3-digit |
| Pressure regulation range MPa | 0,006 - 0,6 MPa |
| Pressure regulation range | 0,06 - 6 bar |
| Inlet pressure 1 | 6 - 8 bar |
| Supply pressure 1 MPa | 0,6 - 0,8 MPa |
| Max. pressure hysteresis (MPa) | 0,003 MPa |
| Max. pressure hysteresis | 0,03 bar |
| Max. pressure hysteresis | 0,435 psi |
| Standard nominal flow rate | 800 l/min |
| Operating voltage range DC | 21,6 - 26,4 V |
| Max. current consumption | 160 mA |
| Duty cycle | 100 % |
| Max. electrical power consumption | 4,2 W |
| Residual ripple | 10 % |
| Switch output | PNP |
| Signal range, analogue output | 0 - 10 V |
| Signal range, analogue input | 0 - 10 V |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] Inert gases |
| Note on operating and pilot medium | Lubricated operation not possible |
| Authorisation | RCM Mark c UL us - Listed (OL) |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | to EU directive for EMC in accordance with EU RoHS directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC To UK RoHS instructions |
| Corrosion resistance classification CRC | 2 - Moderate corrosion stress |
| PWIS conformity | VDMA24364-B2-L |
| Medium temperature | 10 - 50 °C |
| Protection class | IP65 |
| Ambient temperature | 0 - 60 °C |
| Product weight | 390 g |
| Linearity | 1 %FS |
| Hysteresis | 0,5 %FS |
| Reproducibility | 0,5 %FS |
| Overall accuracy | 1,25 %FS |
| Temperature coefficient | 0,04 %/K |
| Electrical connection | 5-pin M12 Plug |
| Mounting type | with through hole |
| Pneumatic connection, port 1 | G1/8 |
| Pneumatic connection, port 2 | G1/8 |
| Pneumatic connection, port 3 | G1/8 |
| Materials note | Free of copper and PTFE Conforms to RoHS |
| Material housing | Anodised wrought aluminium alloy |
© 2022 Festo AG & Co. KG