Festo AG & Co. KG
552877
semi-rotary drive
DAPS-0015-090-RS3-F03-CR
single-acting, air connection to VDI/VDE 3845 Namur valves, direct flange mounting, stainless steel version.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Size of actuator | 0015 |
| Flange hole pattern | F03 |
| Swivel angle | 90 deg |
| Shaft connection depth | 10,2 mm |
| Cushioning | No cushioning |
| Assembly position | Any |
| Mode of operation | single-acting |
| Design structure | Yoke kinematics |
| Position detection | No |
| Closing direction | right-closing |
| Safety Integrity Level (SIL) | Product can be used in SRP/CS up to SIL 2 (high demand) Product can be used in SRP/CS up to SIL 2 low demand |
| Connection pressure for spring force | 0,42 MPa |
| Supply pressure for spring strength | 4,2 bar |
| Operating pressure MPa | 0,42 - 0,84 MPa |
| Operating pressure | 4,2 - 8,4 bar |
| Nominal operating pressure | 0,56 MPa |
| Nominal operating pressure | 5,6 bar |
| CE mark (see declaration of conformity) | to EU directive explosion protection (ATEX) |
| UKCA marking (see declaration of conformity) | To UK EX instructions |
| ATEX category Gas | II 2G |
| ATEX category Dust | II 2D |
| Explosion ignition protection type Gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type Dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion-proof ambient temperature | -20°C <= Ta <= +60°C |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC | 3 - High corrosion stress |
| Ambient temperature | -20 - 80 °C |
| Torque at rated operating pressure and 0° rotation angle | 17,6 Nm |
| Torque at nominal operating pressure with 50° swivel angle | 9,3 Nm |
| Torque at nominal operating pressure with 90° swivel angle | 13,8 Nm |
| Spring return torque with 0° swivel angle | 7,5 Nm |
| Spring return torque with 50° swivel angle | 5,6 Nm |
| Spring return torque at 90° | 11,3 Nm |
| Spring strength | 3 |
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° | 0,6 l |
| Product weight | 1600 g |
| Shaft connection | T9 |
| Pneumatic connection | G1/8 |
| Materials note | Conforms to RoHS |
| Material cover | High alloy steel, non-corrosive |
| Material number, cover | 1.4408 |
| Material seals | FPM NBR PUR |
| Material housing | High alloy steel, non-corrosive |
| Material number for housing | 1.4408 |
| Material screws | High alloy steel, non-corrosive |
| Material shaft | High alloy steel, non-corrosive |
| Material number for shaft | 1.4301 |
© 2022 Festo AG & Co. KG