Festo AG & Co. KG
542218
proportional pressure regulator
VPPM-6TA-L-1-F-0L6H-S1
More detailed information about this product!
Festo Data sheet
Criterion | Feature |
Nominal diameter, pressurisation | 6 mm |
Nominal diameter, exhaust | 4,5 mm |
Type of actuation | electrical |
Sealing principle | soft |
Assembly position | Any |
Design structure | Pilot actuated diaphragm regulator |
Short circuit strength | for all electrical connections |
Safety instructions | VPPM safety position: If the power supply cable is interrupted, output pressure is maintained unregulated. |
Polarity protected | for all electrical connections |
Type of reset | mechanical spring |
Type of piloting | Piloted |
Valve function | 3-way proportional-pressure regulator |
Type of display | LED |
Pressure regulation range MPa | 0,006 - 0,6 MPa |
Pressure regulation range | 0,06 - 6 bar |
Inlet pressure 1 | 0 - 8 bar |
Supply pressure 1 MPa | 0 - 0,8 MPa |
Max. pressure hysteresis | 0,03 bar |
Standard nominal flow rate | 900 l/min |
Operating voltage range DC | 21,6 - 26,4 V |
Max. current consumption | 300 mA |
Duty cycle | 100 % |
Max. electrical power consumption | 7 W |
Residual ripple | 10 % |
Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] Inert gases |
Note on operating and pilot medium | Lubricated operation not possible |
Authorisation | RCM Mark c UL us - Listed (OL) |
KC mark | KC-EMV |
CE mark (see declaration of conformity) | to EU directive for EMC |
Corrosion resistance classification CRC | 2 - Moderate corrosion stress |
Medium temperature | 10 - 50 °C |
Protection class | IP65 |
Ambient temperature | 0 - 60 °C |
Product weight | 400 g |
Linearity error, FS | 1 % |
Linearity | 1 %FS |
Hysteresis | 0,5 %FS |
Reproducibility | 0,5 %FS |
Overall accuracy | 1,25 %FS |
Temperature coefficient | 0,04 %/K |
FS repetition accuracy | 0,5 % |
Electrical connection | via manifold block |
Mounting type | with through hole with accessories Optional |
Pneumatic connection, port 1 | Sub-base |
Pneumatic connection, port 2 | Sub-base |
Pneumatic connection, port 3 | Sub-base |
Materials note | Conforms to RoHS |
Material housing | Wrought Aluminium alloy Anodised |
© 2022 Festo AG & Co. KG