Festo AG & Co. KG
540223
handling module
HSW-10-AP-SD
Pick and Place for repositioning parts at an angle of 90°, with protective cover.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Working stroke | 9 - 15 mm |
| Size | 10 |
| Max. linear stroke at 90° swivel angle | 90/90 mm |
| Z stroke | 80 - 100 mm |
| Cushioning | CC: Shock absorber at both ends Soft characteristic |
| Assembly position | Any |
| Design structure | linear guide plus rotating bearing Swivel drive guided motion sequence |
| Position detection | For proximity sensor |
| Operating pressure | 4 - 8 bar |
| Minimum cycle time | 0,6 s |
| Repetition accuracy, end positions | +/-0,02 mm |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:-:-] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Ambient temperature | 0 - 60 °C |
| Max. torque Mx | 0,6 Nm |
| Max. torque My | 0,6 Nm |
| Max. torque Mz | 0,6 Nm |
| Maximum effective load | 0,5 kg |
| Maximum process force in Y direction | 30 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi) | 30 N |
| Product weight | 1350 g |
| Mounting type | With through-hole and centring sleeve |
| Pneumatic connection | M3 |
| Materials note | Free of copper and PTFE |
| Material stops | High alloy steel |
| Material cover | Wrought Aluminium alloy Anodised |
| Material spring pressure piece | High alloy steel |
| Material sub-base | Wrought Aluminium alloy Anodised |
| Material bracket | Wrought Aluminium alloy Anodised |
| Material cross-guide | Heat-treatment steel |
| Material swivel lever | Case-hardened steel Burnished |
| Material slotted guide plate | Case-hardened steel Hardened |
| Material sensor rail | Wrought Aluminium alloy Anodised |
| Material bar | Wrought Aluminium alloy Anodised |
| Material adjusting screw | High alloy steel |
© 2022 Festo AG & Co. KG