Festo AG & Co. KG
535498
linear/swivel clamp
CLR-40-20-G-P-A-K11-R8
clamping system with linear motion, standard hole pattern according to ISO 21287. With dust and weld spatter protection.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Total stroke | 38 mm |
| Piston diameter | 40 mm |
| Piston rod thread | M8 |
| Clamping stroke | 20 mm |
| Cushioning | P: Flexible cushioning rings/plates at both ends |
| Assembly position | Any |
| Design structure | Piston Piston rod Cylinder barrel |
| Position detection | For proximity sensor |
| Swivel direction | Straight |
| Variants | spatter protection Dust protection |
| Operating pressure | 2 - 10 bar |
| Mode of operation | double-acting |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC | 2 - Moderate corrosion stress |
| Ambient temperature | -10 - 80 °C |
| Effective clamping force at 0.2 MPa (2 bar, 29 psi) | 176 N |
| Effective clamping force at 0.4 MPa (4 bar, 58 psi) | 355 N |
| Effective clamping force at 0.6 MPa (6 bar, 87 psi) | 536 N |
| Max. tightening torque, tensioning finger screw | 24 Nm |
| Theoretical clamping force at 0.6 MPa (6 bar, 87 psi) | 633 N |
| Product weight | 1010 g |
| Mounting type | with through hole with internal (female) thread with accessories Optional |
| Pneumatic connection | G1/8 |
| Material wiper seal | PPS |
| Material of flange screw | Steel Galvanised |
| Material cover | Wrought Aluminium alloy coated |
| Material seals | NBR TPE-U(PU) |
| Material housing | Wrought Aluminium alloy Smooth anodised |
| Material piston rod | coated High alloy steel, non-corrosive |
| Material cylinder barrel | Wrought Aluminium alloy Smooth anodised |
© 2022 Festo AG & Co. KG