Festo AG & Co. KG
535494
linear/swivel clamp
CLR-40-10-L-P-A-K11-R8
clamping system with linear and swivel motion 90 degrees to the left. standard hole pattern according to ISO 21287. With dust and weld spatter protection.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Total stroke | 28 mm |
| Piston diameter | 40 mm |
| Piston rod thread | M8 |
| Swivel angle | 90 deg +/- 2 deg |
| Clamping stroke | 10 mm |
| Cushioning | P: Flexible cushioning rings/plates at both ends |
| Assembly position | Any |
| Design structure | Piston Piston rod Cylinder barrel |
| Position detection | For proximity sensor |
| Swivel direction | Left |
| Variants | spatter protection Dust protection |
| Operating pressure | 2 - 10 bar |
| Mode of operation | double-acting |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC | 2 - Moderate corrosion stress |
| Ambient temperature | -10 - 80 °C |
| Effective clamping force at 0.2 MPa (2 bar, 29 psi) | 176 N |
| Effective clamping force at 0.4 MPa (4 bar, 58 psi) | 355 N |
| Effective clamping force at 0.6 MPa (6 bar, 87 psi) | 536 N |
| Max. tightening torque, tensioning finger screw | 24 Nm |
| Theoretical clamping force at 0.6 MPa (6 bar, 87 psi) | 633 N |
| Product weight | 895 g |
| Mounting type | with through hole with internal (female) thread with accessories Optional |
| Pneumatic connection | G1/8 |
| Material wiper seal | PPS |
| Material of flange screw | Steel Galvanised |
| Material cover | Wrought Aluminium alloy coated |
| Material seals | NBR TPE-U(PU) |
| Material housing | Wrought Aluminium alloy Smooth anodised |
| Material piston rod | coated High alloy steel, non-corrosive |
| Material cylinder barrel | Wrought Aluminium alloy Smooth anodised |
© 2022 Festo AG & Co. KG