Festo AG & Co. KG
533613
handling module
HSP-16-AS
Driveless variant with bearing and shaft.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Size | 16 |
| Y stroke | 90 - 110 mm |
| Z stroke | 35 - 50 mm |
| Z stroke, working stroke | 20 mm |
| Cushioning | CC: Shock absorber at both ends Soft characteristic |
| Assembly position | Guide rail Vertical |
| Design structure | Drive shaft Cross-guide guided motion sequence |
| Position detection | For proximity sensor |
| Protection against torque/guide | Cross-guide |
| Minimum cycle time | 0,8 s |
| Repetition accuracy | ±0,01 mm |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:-:-] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Ambient temperature | 0 - 60 °C |
| Max. drive torque at drive shaft | 2,5 Nm |
| Max. axial force at drive shaft | 30 N |
| Max. torque Mx dynamic | 2,4 Nm |
| Max. torque Mx static | 10 Nm |
| Max. torque My dynamic | 2,4 Nm |
| Max. torque My static | 10 Nm |
| Max. torque Mz dynamic | 2,4 Nm |
| Max. torque Mz static | 10 Nm |
| Maximum effective load | 1 kg |
| Max. radial force at drive shaft | 75 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi) | 50 N |
| Product weight | 3100 g |
| Mounting of front unit | with through hole |
| Mounting type | with through hole With slot nuts |
| Materials note | Free of copper and PTFE |
| Material sub-base | Wrought Aluminium alloy |
| Material cross-guide | Heat-treatment steel |
| Material side components | Wrought Aluminium alloy |
© 2022 Festo AG & Co. KG