Festo AG & Co. KG
525660
parallel gripper
HGPP-10-A-G2
Precise, for position sensing via hall effect sensor or inductive sensors. With gripping force retention when closing...-G2.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Size | 10 |
| Stroke per gripper jaw | 2 mm |
| Max. replacement accuracy | 0,1 mm |
| Repetition accuracy, gripper | <= 0,02 mm |
| Number of gripper fingers | 2 |
| Mode of operation | double-acting |
| Gripper function | Parallel |
| Gripper force back-up | On closing |
| Design structure | Rack and pinion |
| Position detection | For Hall sensors For inductive sensors |
| Operating pressure | 5 - 8 bar |
| Max. operating frequency of gripper | 4 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 26 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 32 ms |
| Max. mass per external gripper finger | 50 g |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC | 2 - Moderate corrosion stress |
| Ambient temperature | 5 - 60 °C |
| Max. force on gripper jaw Fz static | 40 N |
| Max. torque at gripper Mx static | 1,5 Nm |
| Max. torque at gripper My static | 1,5 Nm |
| Max. torque at gripper Mz static | 1,5 Nm |
| Product weight | 127 g |
| Mounting type | with internal (female) thread |
| Pneumatic connection | M3 |
| Materials note | Free of copper and PTFE |
| Material cover cap | POM |
| Material housing | Wrought Aluminium alloy Hard anodised |
| Material gripper jaws | Wrought Aluminium alloy Nickel plated |
© 2022 Festo AG & Co. KG