Festo AG & Co. KG
197561
parallel gripper
HGPM-08-EO-G9
Direct flange mounting with screws Locating pins are used for centring.
More detailed information about this product!
Festo Data sheet
| Criterion | Feature |
| Size | 8 |
| Stroke per gripper jaw | 2 mm |
| Max. replacement accuracy | 0,2 mm |
| Rotationally symmetrical | 0,15 mm |
| Repetition accuracy, gripper | <= 0,05 mm |
| Number of gripper fingers | 2 |
| Mode of operation | single-acting open |
| Gripper function | Parallel |
| Design structure | Inclined plane |
| Position detection | No |
| Total gripping force at 0.6 MPa (6 bar, 87 psi), opening | 16 N |
| Operating pressure | 4 - 8 bar |
| Max. operating frequency of gripper | 4 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 4,9 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 2,3 ms |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC | 1 - Low corrosion stress |
| Ambient temperature | 5 - 60 °C |
| Gripping force per gripper jaw at 0.6 MPa (6 bar, 87 psi) closing | 8 N |
| Max. force on gripper jaw Fz static | 10 N |
| Max. torque at gripper Mx static | 0,1 Nm |
| Max. torque at gripper My static | 0,1 Nm |
| Max. torque at gripper Mz static | 0,1 Nm |
| Product weight | 18 g |
| Mounting type | with internal (female) thread |
| Pneumatic connection | M3 |
| Materials note | Free of copper and PTFE |
| Material cover cap | POM |
| Material housing | Wrought Aluminium alloy Anodised |
| Material gripper jaws | High alloy steel |
© 2022 Festo AG & Co. KG