Festo AG & Co. KG

170905
guided drive
DFM-12-80-P-A-KF
With integrated guide.

The proximity switch, type SMTSO-8E, can be used with this product with stroke lengths equal to or greater than 50 mm. The corresponding mounting kit, type SMB-8E, is mounted inwardly or outwardly.

More detailed information about this product!

Festo Data sheet

CriterionFeature
Centre of gravity distance from working load to yoke plate25 mm
Stroke80 mm
Piston diameter12 mm
Operating mode of drive unitYoke
CushioningP: Flexible cushioning rings/plates at both ends
Assembly positionAny
GuideRecirculating ball bearing guide
Design structureGuide
Position detectionFor proximity sensor
Operating pressure MPa0,2 - 1 MPa
Operating pressure2 - 10 bar
Max. speed0,8 m/s
Mode of operationdouble-acting
Operating mediumCompressed air in accordance with ISO8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (subsequently required for further operation)
Corrosion resistance classification CRC0 - No corrosion stress
PWIS conformityVDMA24364-B1/B2-L
Ambient temperature-5 - 60 °C
Impact energy in end positions0,07 Nm
Max. force Fy292 N
Max. force Fy static804 N
Max. force Fz292 N
Max. force Fz static804 N
Max. torque Mx5,99 Nm
Max. torque Mx static16,48 Nm
Max. torque My3,07 Nm
Max. torque My static8,44 Nm
Max. torque Mz3,07 Nm
Max. torque Mz static8,44 Nm
Max. permissible torque load Mx as a function of the stroke0,56 Nm
Max. useful load as a function of the stroke at defined distance xs23 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), retracting51 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance68 N
Moving mass237 g
Product weight655 g
Centre of gravity of the moving mass as a function of the stroke40,6 mm
alternative connectionsSee product drawing
Pneumatic connectionM5
Materials noteFree of copper and PTFE
Conforms to RoHS
Material coverWrought Aluminium alloy
Material sealsNBR
Material housingWrought Aluminium alloy
Material piston rodHigh alloy steel, non-corrosive

© 2022 Festo AG & Co. KG